Advantages from the beginning
> 25 years product warranty > Wind tunnel tested > Incl. protection pads with aluminum coating > TUV certified, conforms to UL 2703 > Patent pending > Without roof penetration > Optimum module ventilation > Complimentary ballast calculation incl. roof layout > Made in Europe > Minimum order only 2 KWp |
> Module clamps with grounding pins > TUV certified, conforms to IEC 61215 > Fire tested according to UL 1703 > Best price value available > The fastest installation in the industry 1 kWp /5 min., 2 men > Statically optimized system > Less material = Less shipping costs > Optimized wind suction, therefore less ballasting > Optimized water drainage > Suitable for roof edge zones |
Technical Details
Mounting Tilt:
AEROCOMPACT S: 5°, 10°, 15°
Inter-Row Spacing:
AEROCOMPACT S 5 (30°): 7 inch (178 mm)
AEROCOMPACT S 10 (25°): 15 inch (380 mm)
AEROCOMPACT S 15 (25°): 22.5 inch(571 mm)
Min. Array Size:
AEROCOMPACT S: 2 rows with 3 modules / 3 rows with 2 modules
Roof Edge Zone:
Roof areas F and G can be used
Module Dimensions:
37.4 – 41.3 inch x 61.1 – 81.9 inch (width – length)
Max. Roof Slope:
5 Degree
Roof Height:
max. 25 m
Windload:
up to 2.4 KN/m2
(Design load as a load combination of dead load and wind suction)
Snowload:
AEROCOMPACT Standard up to 2.4 KN/m2
AEROCOMPACT Alpin up to 4.4 KN/m2
(Design load as a load combination of dead load, wind and snow pressure)
Module approval:
Please request approved module list from the module manufacturer or Aerocompact
Materials:
Supporting materials made of aluminum EN AW 6060 T64, module-clamps aluminum EN AW 6063 T66, stainless steel screws, wind-deflector galvanized steel
Shipping:
approx. 40 KW per pallet, 700 KW per truckload
System Requirement:
Proof of static load capacity of the roof and the insulation needs to be provided by customer. General terms / warranty conditions and usage agreement apply.