Rails

Rapid 1 Rail
KRAPID1-XX-F : XX(Size) : Per foot up to 20 ft | 10’2” | 13’6”
F: M (Mill Finish) | B (Black Anodized) | C (Clear Anodized)
The Rapid 1 is our most commonly used rail. It attaches to the roof via the use of L-Brackets or Standing-L. It’s designed with installers in mind, working seamlessly with our cable management, microinverter mounts, and others.

Ground Hog Rail
KMGHR-XX-M : XX(Size) : Per foot up to 24 ft
F: M (Mill Finish) | C (Clear Anodized) | UBS (Blue Skin)
Ground Hog rail is an excellent solution for custom framing mounting. The rail is capable of integrated cable management.

Venture Rail
KVRRXX-M : XX(Size) Per foot up to 30 ft
Venture Rail is an excellent solution for custom framing mounting having longer spans than other types of rails. Two bear clamps or two L-Bracket attachments are recommended, and the rail is capable of cable management on both sides of the rail. The top of the rail can be gasketed for watertight.

Bifacial Rail

York Rail
Standard Hardware

Mid-Clamp
KMWCXXXX-F : XXXX(Size(mm)) : 3137 (31 – 37) | 3843 (38-43) | 4450 (44-50)
F: Finish: M (Mill Finish) | C (Clear Anodized) | B (Black Anodized)
Mid Clamp is installed between panels to provide a stronger connection via the use of integrated WEEB bonding.


End-Clamp
KECXX-F : XX(size(mm)) : per mm between 30 and 50
F: Finish: M (Mill Finish) | C (Clear Anodized) | B (Black Anodized)
End Clamp is installed at the end of panels to provide a stronger connection with the adjustable height between 30 and 50mm.


Hidden End Clamp


L-Bracket
KLBX-FNH : X(Size (in)) : 2 | 3 | 4 | 5
F: Finish: M (Mill Finish) | C (Clear Anodized) | B (Black Anodized)


L-Bracket with 3/8 clearance slot
KLBX-F-37 : X(Size (in)) : 3 | 4
F: Finish: M (Mill Finish) | C (Clear Anodized) | B (Black Anodized)



Rail Joiner
KJS2-F : F(Finish) : M (Mill Finish) | C (Clear Anodized) | B (Black Anodized)
Joins any standard KINETIC Rails via the use of KSR WEEB bonding. Joins any standard Kinetic rails. Available with KSR WEEB bonding.


Toe Clamp
KHTC-F : F(Finish) : M (Mill Finish) | C (Clear Anodized) | B (Black Anodized)
Mounts panels from inside with no exposed hardware for clean tidy appearance of arrays. The clamp is also used as a small conduit attachment or an aircraft cable wire management mounting kit.
